Description
Features
• It is a two-component material.
• It is resistant to water and moisture and has superior insulation.
• Excellent adhesion to almost any surface.
• Solvent free, can be applied easily in environments without ventilation.
• Cures even at low temperatures and under water films.
• Good resistance to chemicals.
• Resistant to sudden temperature changes (hot to cold).
• Easy to mix. It is ready to use in a short time.
• Provides strong adhesion to the surface.
• Low viscosity and easy to apply.
• A smooth surface is obtained by filling the roughness on the applied surface.
Technicial Specifications
Color : Clear yellow clear
Density (25ºC) : 1 g / cm3
Weight of use :4.5
Time of Use (25ºc) : 20-30 Minutes
First Drying (25ºc) : 4 Hours
Final drying time (25ºc) : 24 hours
Hardness (DIN 53505) : 25-30 (Shore D)
Application Amount (25ºc) : 300-400 gr / m2
Application Temperature : 10-40 ºC
Application
• Surfaces must be cleaned from oil, dirt, dust and waste.
• II. Component I is added to the component.
• Mix until a homogeneous color is obtained.
• The resulting mixture can be applied by roller or brush.
• The prepared mixture should be consumed within ~ 30 minutes.
• Depending on the porosity and absorbency of the surface; 300-400 gr / m2.
Considerations
• Since the pot life is short, it should be mixed in quantity and spread on the surface immediately.
• Never refine the product when priming on wet surfaces or water films
• Unfinished surfaces should be cleaned with thinner within 5–10 minutes.
• In case of eye contact, rinse the eye with plenty of water and seek medical dvice immediately.
• It is useful to wear gloves during operation.
• Tools and equipment at the end of use thinner, acetone and so on. should be cleaned with.
Reviews
There are no reviews yet.