Description
Application
• PVC floor covering in sheets and tiles
• Cushion vinyl
• PVC backed carpet
• Rubber floor covering with a smooth back in sheets and tiles
• Polyolefin floor covering
Working Process
Storage : Store cool and free from frost.
Open time : 10-120 minutes.
Latency : 10 – 50 minutes.
Drying time : 48 hours.
Shelf life : 12 months, in unopened packaging.
Substratum
• MaxTiger is suitable for any type of subfloor that has a good tensile and compression strength.
• The subfloor should also be even, clean, permanently dry and
free from grease and dirt, according to the requirements of procedure.
• When installing on impervious subfloors apply a 2 mm levelling compound layer.
Working conditions
Required surrounding temperature : 18 – 23 °C
Temperature for material and subfloor : Min. 15° – max. 20 ºC.
Relative humidity : 40 – 80%.
•Apply the adhesive with a fine-notched adhesive spreader. Type of spreader depends on the type of floor covering and condition of the subfloor.
•Immediately after bonding roll the floor covering carefully.
Sheet-ends and longitudinal joints are to be pressed firmly.
•Rolling and pressing should be repeated after approx.
30-45 minutes.
•Remove fresh adhesive spots immediately with water
•Clean tools with water immediately after use
•MaxTiger can be applied on underfloor heating systems (Turn off the heater 24 hours before application)
Reviews
There are no reviews yet.